Mechanical C Type Power Press Machine

-

 

Mechanical C Type Power Press Machine

Mechanical C Type Power Press Machine

The main components for power transmission on a Mechanical Power Press are the clutch, flywheel, and crankshaft. The slide is attached to a crankshaft with connecting rods (“pitmans”) and the crankshaft is coupled to the flywheel, which always rotates when the motor is running.

Upper and lower dies are attached to ram and once work piece placed on the bed is fed to the machine, and operation initiated. As a result of the rotary motion of flywheel, pressing and shaping task is performed when upper and lower die put a force together.





FOR MORE DETAIL CONTACT US 
EMAIL: sharp.bangalore@gmail.com, sharppowerpress@gmail.com
CELL NO: +91-9916841699

Comments

Post a Comment

Popular posts from this blog

C Type Mechanical Power Press Machine

-
Image
C Type Mechanical Power Press Machine C Type Mechanical Power Press Machine C Type Mechanical Power Press is  ergonomically and economically designed so as to churn out elevated output rates, day in and outing. The steel construction of the facility press machine imparts it solidarity and endurance and increases its life by significant amount of years. As a result, it's highly preferred for operations involving heavy-duty materials since the crankshaft of the facility press has the power to sustain high-pressure levels. The crankshaft also ensures that the device operates on the uniform strokes. a number of the applications include automobile parts, aluminum utensils, and defense engineering components. FOR MORE DETAIL CONTACT US  EMAIL: sharp.bangalore@gmail.com CELL NO: +91-9916841699
Read more

Hydraulic Deep Drawing Press Machine

-
Image
Hydraulic Deep Drawing Press Machine HYDRAULIC DEEP DRAWING PRESS MACHINE  Deep Drawing is a process in sheet metal forming by the Hydraulic action of a punch. A flat sheet metal blank is formed over a single, rigid, shape defining tool half by a flexible rubber diaphragm under uniform hydro-static pressure. The process results in scratch-free parts regardless of the sheet thickness or complexity of the tool, including undercuts. High forming pressure ensures close tolerance parts direct from the press with little or no secondary hand work required.The process is considered deep when the depth of the drawn part exceeds its diameter. FOR MORE DETAIL CONTACT US  EMAIL: sharp.bangalore@gmail.com CELL NO: +91-9916841699
Read more

10Ton Power Press Machine

-
Image
10 Ton Power Press Machine 10 Ton Power Press Machine Power presses are metalworking machines used primarily to cut, punch, or form metal using tooling (dies) attached to the slide (ram) and bed. The slide has a controlled reciprocating motion toward and away from the bed surface and at right angles to it. It is guided in the frame of the machine — either a “C” frame [open back inclined (OBI)] or straight side frame — to give a definite path of motion. The two most common types of power presses are mechanically and hydraulically powered. Though these two share common features, the mechanical power press is the most widely used throughout industry and has been the subject of most of the research done, primarily due to its tenure in industry and the number of injuries associated with it. FOR MORE DETAIL CONTACT US  EMAIL: sharp.bangalore@gmail.com, sharppowerpress@gmail.com CELL NO: +91-9916841699
Read more